SumiSoaker | Mark III Hose Kits

$50.96$176.48 AUD excl gst

SumiSoaker Mark III is SumiSoaker R-Wide’s little sibling

SumiSoaker Mark III is cost effective, compact and runs on a low operating pressure and flow rate. Ideal for irrigation on long narrow or winding strips to 5 metres wide and up to 100m long, including maket garden bed blocks and Cocoon Tunnels, swales, orchards, nature strips, sporting greens etc. The Mk III line is easily connected and removed to your choice of attachment, hose fitting or agline.

NOTE: Presure regulator required. Low pressure, maximum 80kPa (11psi). Household water reaches 500kPa

Often purchased with; Senninger 10 PSI inline pressure regulator

Sumi Mark III is ideal where there is;

  • limited operating pressure
  • furrows or hilled beds
  • need to only water a 5m width or less
  • as a drip or spray irrigation as it can be used in either form just by adjusting the water pressure
  • or you’re simply looking for a lightwight cost effective watering unit.

SumiSoaker by Sumika Agritech is the highest quality in it’s class delivering many years of hassle free use, the SumiSoaker has the professional and home garden covered

The simple installation process involves unrolling the hose in the desired location and connecting to a standard agline fitting or garden hose fitting. The gentle rainfall effect keeps the soil structure intact, not hardening the surface and allowing slow absorption of the water to the roots.

Brand Catalogue: Collections:

SumiSoaker | Mk III Hose Kits

The kits comes pre-assembled with:

  • 1 x 25mm male threaded end to suit garden hose fitting or agline fitting
  • 1 x Inline 181 micron filter
  • 1 x Selected length of Mk III irrigation hose
  • 1 x Adjustable end clip


  • Lightweight and easy to manoeuvre – 100m unit weighs only 5kgs +/-
  • Water an area of up to 500m² – equivalent to a full-sized tennis court
  • Cost efficient to operate – Sumi Mark III is cost effective and can be used in semi permanent positions if needed
  • Low operating pressure and flow rate requirements reduce running costs. Max operating pressure is 80kpa (11.6psi)
  • Variable length – Using the unique sliding stopper
  • Sumi Mark III is available with a special inline filter
  • Fine, soft droplets – Maximises ground soakage and minimises run off
  • Multiple uses – Like all Sumi Hoses, the Sumi Mark III has a whole range of uses and applications.



Maximum Recommended Operating Pressure**:

80kpa (0.8kg/cm²), 11.6 psi

Required Flow Rate

per Metre:

0.5 litres per metre of hose per minute

Required flow rate/50m

25 litres per minute

Required flow rate/100m

48 litres per minute

Coverage at Optimum Pressure and Flow Rate:

5m (2.5m either side of hose)

Water Application Rate (at max. pressure and

max. flow rate):

Equivalent to 4mm/hour of rain

Dimensions and Weight:

30mm diameter / 4kg weight

Coverage Area:

Rectangular. Up to 500m² (5m wide x 100m long). Equivalent to a full sized tennis court.

Hose Connection:

Supplied fitted with 25mm (1″) male thread to suit 12mm, 18mm click on or 25mm agline attachments

Operating Length:

Adjustable operating length using sliding stopper

Tube Width (Flat):


Tube Diameter (Inflated):


Number of Holes:

4 holes/320mm of tube


Special black polyethylene


181 micrometer = 100 mesh


You may also like…


    SumiSoaker | R Wide Hose Kits (inc fittings)

    $76.63$424.86 AUD excl gst
    Select options
  • Senninger PSR2 | 10PSI Pressure Regulator 3/4″ F x F

    $29.70 AUD excl gst
    Add to cart
  • New

    Adjustable End Clip | SumiSoaker Mk III

    $4.97 AUD excl gst
    Add to cart
  • New

    SumiSoaker Mk III | 100m roll

    $128.67 AUD excl gst
    Add to cart